Alexis's FotoPage

By: Alexis Derby

[Recommend this Fotopage] | [Share this Fotopage]
View complete fotopage

Saturday, 3-Aug-2013 13:51 Email | Share | Bookmark
Steps To Fix Your Air Conditioning Unit

When room temperatures swing about 3 degrees F. between when the air conditioner goes off and on again, it generally means that the pump isn't cycling on frequently enough. When room temperatures drop lower than the set temperature on the thermostat, it usually means that the thermostat is incorrectly calibrated or set up where it does not sense a proper sampling of room air.

Many people think that by turning their systems off and permitting their houses to get hotter during the day, they are causing their systems to run less and are for that reason, conserving money, but, this is not the case. The trouble is that air is not the only thing that heats up when you do this; furniture, carpeting, walls, etc. will also heat up. When you get home and turn your air conditioner back on, it actually needs to work harder and longer to get rid of all the extra heat and bring the temperature down to a comfortable level.

You may be able to repair your air conditioner on your own. Here are some things to consider before you call an air conditioning repairman to guarantee you don't get an $ 80 or $ 100 fee for a minor item. These are all easy steps that any resident can take to discover and fix a minor A/C issue that is keeping your system from cooling.

Many heating/cooling ducts are metal so they conduct sound quite readily from the air-handling unit to your rooms. To break the conduction of noise, you could have a heating contractor insert flexible insulation ductwork between the heating/cooling system and the ductwork runs. If you hear a pinging or popping sound coming from the ductwork, this might be triggered by thermal expansion or by air blowing past a loose flap of metal. Track along the duct runs, listening for the noise. If you discover it, make a small dent in the sheet metal to provide a more rigid surface that's less likely to move as it heats and cools.

Keep your doors open as much as possible. A properly set up and balanced cooling system is made to deliver and return hot or cold air evenly to and from all spaces in your home. Closing doors and supply vents, however, could disrupt this balance and cause certain spaces to come to be hotter or colder than others, resulting not only in discomfort, but also in reduced efficiency. It also causes air pressure to raise in your ductwork, which could potentially trigger or magnify air leakages, again decreasing the efficiency.

Doors to unused rooms can be closed as long as there is enough room under the door to permit air circulation; thick carpeting which brushes against the bottom of the door develops a seal of sorts. If you do choose to close off a few of your supply registers, never close off vents to more than 10 % of your total conditioned area.Http://\nSan Diego California Air Conditioning Repair

View complete fotopage

© Pidgin Technologies Ltd. 2016